STRETCHING - add an extractor

DECORATIVE EXTRACTORS

Decorative extractors are free-standing extractors that are not integrated into a wall cabinet.

- Installation with a set of low cabinets

While installing a set of low cabinets, it is possible to add a decorative extractor when choosing the equipment. 

- FURNISH

-- KITCHEN

--- KITCHEN BY STRETCHING

---- LOW CABINET 

Place your set and stretch it over your hob : the hood will automatically overlap the hob. 

Note :

This method is recommended : thanks to it the extractor will be linked to the low cabinet set. This ensures that the extractor is properly superimposed on the hob, and that the kitchen rules are respected. 

Indeed, there are several rules on the position of the extractor: 

- height in relation to the hob, depending on the type of hob

- lateral distance from wall cabinets.

- MODIFY your decorative extractor

-- adjust the height of the decorative extractor

Once your decorative extractor is placed in the plan, you can adjust its height. In 3D, select the extractor, then move it with the vertical arrows.

-- modify your decorative extractor model

Select the extractor, click on the icon "properties", the tab "customize" opens in the left menu. Click on "appliances", feel free to filter on cap extractor, decorative wall extractor, decorative island extractor and / or telescopic extractor. 

-- replace your decorative extractor with an integrated extractor

Select the extractor, click on the icon "properties", the left menu opens. Go to the tab "replace by". Filter on wall cabinet or wall cabinet 103.

INTEGRATED EXTRACTORS in a wall cabinet

The extractors can be integrated into a wall cabinet. 

- Installation with a wall cabinet 

When installing a wall cabinet set, it is possible to add an extractor when choosing the equipment. 

- FURNISH

-- KITCHEN

--- FAST KITCHEN BY STRETCHING

---- WALL CABINETS

Place your set, stretch it above the hob: the extractor automatically overlay the hob.

Note : An integrated extractor is automatically locked when it is linked to a hob.

This method is recommended : the extractor will be linked to the low cabinet set. This will ensure you that the extractor is correctly placed above the hob.

- MODIFY your built-in extractor

-- adjust the height of the built-in extractor

Once your decorative extractor is placed in the plan, you can adjust its vertical position. In 3D, select the extractor, unlock it if it is linked to a low cabinet and then move it with the vertical arrows.

-- replace your cabinet with an integrated extractor by another one 

Select the extractor, click on the icon "replace with", the corresponding tab opens in the left menu. Do not hesitate to use the filters. 

-- change your built-in extractor model

Select the extractor, when you click on the "property" icon, the left menu opens. Go to the "customize" menu. Click on "appliances", feel free to filter on built-in extractor and/or telescopic extractor.