PLANIFICAÇÃO RÁPIDA - adicionar módulos inferiores [EN]

ADD LOW CABINETS
- Adding a set of low cabinets

To add a set of low cabinets, we suggest you to use the stretching method: 

- FURNISH

-- Kitchen

--- Quick kitchen by stretching

---- LOW SET

Two depths are available : 60 or 37 cm. 

Once you have selected the type of cabinet you want, choose the ambience.

> More informations on the ambience of your kitchen

Then you can choose to integrate a hob, a hood, an oven, a sink, a dishwasher, a refrigerator, a wine cellar and/or a washing machine. 

Place your low cabinet in your plan, then fine-tune their position and length using the stretching handles. Again, these actions can be performed in 2D or 3D. 

For your information : automatic finishing

Fileurs and sides are automatically positioned according to the position of your cabinet : next to a wall, next to a high cabinet. Check all the good junctions between low cabinet and high cabinet and low cabinets and walls by repositioning the composition or by playing with the stretching handles. 

The side finishes can be adjusted manually. To do this, click on the "properties" icon in the contextual menu of the set of high cabinets, then go to the "side finishing" tab. 

- Adding a corner low cabinet

Install a set of low cabinets. 

Stretch your set of cabinets in 2D or 3D, using the stretching handles. 

Note: it is impossible to move equipment from one side to another in an L- or U-shaped kitchen. 

There are two solutions: 

1. Use the kitchen networks to place the hob and sink on the correct side of your kitchen

> More information on kitchen networks

2. Place your corner cabinet on the cabinet by cabinet. Then make two stretches: one for each kitchen side. Then you will be able to choose exactly what equipment makes up each kitchen side.

CUSTOMISE FURNITURE

It is possible to customise your low cabinets as you wish: 

> POSSIBLE ACTIONS on a cabinet set

> POSSIBLE ACTIONS on a cabinet