MÓVEL A MÓVEL - adicionar um exaustor [EN] – PT-PT_Centre d'Aide

DECORATIVE EXTRACTORS

Decorative extractors are free-standing extractors that are not integrated into a wall cabinet.

We advice you to use the stretching method instead of this method. Please see the tutorial.

It is possible to install decorative extractor with the cabinet by cabinet method from the APPLIANCES catalog.

- FURNISH

-- KITCHEN

--- KITCHEN CABINET BY CABINET

---- APPLIANCES

Use the filter "type of extractor":

- cap

- decorative extractor

- decorative island

- telescopic

Warning: Check the position and height of your decorative hood in relation to your hob:

The hood should be centered across the width of the hob.
A height between the hood and the hob must be respected depending on the type of hob (gas or electric).

When you place this equipment on cabinet by cabinet : the rules of comfort and safety are not tested.

We are able to check compliance with these rules only if the hood is linked to a low cooking cabinet: for this, it must be added when stretching a base set incorporating a hob and a hood. (see tutorial)

- MODIFY your decorative extractor

-- adjust the height of the decorative extractor

Once your decorative extractor is placed in the plan, you can adjust its height. In 3D, select the extractor, then move it with the vertical arrows.

-- modify your decorative extractor model

Select the extractor, click on the icon "properties", the tab "customize" opens in the left menu. Click on "appliances", feel free to filter on cap, decorative wall, decorative island and / or telescopic.

-- replace your decorative extractor with an integrated extractor

Select the extractor, click on the icon "properties", the left menu opens. Go to the tab "replace by". Filter on wall cabinet or wall cabinet 103.

INTEGRATED EXTRACTORS in a wall cabinet

The extractors can be integrated into a wall cabinet.

- CABINET BY CABINET installation from the APPLIANCE Catalog

[Prefer the stretching method].

- FURNISH

-- KITCHEN

--- KITCHEN CABINET BY CABINET

---- APPLIANCES

Use the " extractor type " filter : built-in or telescopic

- MODIFY your built-in extractor

-- adjust the height of the built-in extractor

Once your decorative extractor is installed in the plan, you can adjust its height position. In 3D, select the extractor, unlock it if it is linked to a low cabinet and then move it with the vertical arrows.

-- replace your cabinet with an integrated extractor by another one

Select the extractor, click on the icon "replace with", the corresponding tab opens in the left menu. Do not hesitate to use the filters.

-- change your built-in extractor model

Select the extractor, when you click on the "property" icon, the left menu opens. Go to the "customize" menu. Click on "appliances", feel free to filter on built-in and/or telescopic.

Extractors integrated in the worktop

Some extractors can be integrated into a worktop.

[available only on a piece of cabinet by piece of cabinet].

- FURNISH

-- KITCHEN

--- KITCHEN CABINET BY CABINET

---- APPLIANCES

Use the filter "type of extractor" : work plan. Put it in the plan, you will probably have to adjust its height. Use the handle to move it in 3D.

MÓVEL A MÓVEL - adicionar um exaustor [EN]